Xerox Wide Format 6622, User Manual

Page: 85 / 212

Scanning To a Standard Mailbox
This section describes scanning to a standard mailbox, and assumes that a mailbox has
already been setup. Listed below are the steps involved in the scanning process:
Step 1: Selecting a Standard Mailbox
Step 2: Selecting Scan to Mailbox Features
Step 3: Select Image Quality Features
Step 4: Select Advanced Settings Features
Step 5: Scanning the Document
Step 6: Stopping a Scan Job
Step 7: Retrieving Files Stored in a Mailbox
Step 1: Selecting a Mailbox and Using Templates
Scanning a copy begins by displaying the Scan to Mailbox screen on the User Interface.
Once that is done, set up the scan job by selecting the necessary features from the Scan
to Mailbox, Image Quality and Advanced Settings tabs.
NOTE
You must first specify the destination of the scanned image data before scanning
can begin.
1. Select Scan to Mailbox.
The screen displays with the following:
1. Destination (mailbox or removable device name)
2. Template (customized format)
3-9
Xerox
®
Wide Format 6622 Solution
™
User Guide
Scanning Documents