Xerox Wide Format 6622, User Manual

Page: 107 / 212

color profile set. The date and time it was created and the image quality levels
included in the profile set are printed on the target for your convenience.
NOTE
You can create specific profile sets for different types of media, such as glossy
or vellum. The profile set names should match the media types your remote
printer feeds.
Problems During Color Calibration
In some rare cases, you may experience problems when creating Color Calibrations. To
prevent problems, ensure the originals used for calibration are not damaged or missing
information. If incorrect calibration targets are used, color images may be jeopardized.
Color Calibration Processing Failure - error screen
• Ensure you are feeding a calibration target rather than another document into the
Scanner. Targets are marked with a title for identification.
• Check that the color calibration target is inserted in the correct orientation (loaded
face down and arrows forward).
• Ensure that the printer is not out of color ink.
• Ensure the color calibration target does not have streaks or blotches of ink.
• Ensure all color patches are present.
Mismatch session or wrong printer message displays in the following instances:
• If a calibrated target from a different printer was inserted inadvertently.
• If a calibration target from a different calibration session, other than the current one,
was inserted.
A possible solution is to verify the label on the calibration target matches the current
job. The label lists the identity of the calibration target.
3-31
Xerox
®
Wide Format 6622 Solution
™
User Guide
Scanning Documents