Xerox Wide Format 6622 User Manual Download

Page: 137 / 212

NOTE

Make sure the DHCP checkbox is not checked. Otherwise the IP Address, Gateway
and Netmask options cannot be selected.

3. Use the numeric touch pad to enter the IP Address in the format nn.nnn.nn.nnn.
4. Select Enter.

Setting up IP Gateway

1. Select the Services button on the Control Panel, followed by Machine Info

> Administration Tab > Network Setup.

2. Select Gateway from the Network Setup screen.

The IP Gateway screen displays.

3. Enter the Gateway in the format XXX.XXX.XXX.XXX.
4. Select Enter.

Setting up Netmask

1. Select the Services button on the Control Panel, followed by Machine Info

> Administration Tab > Network Setup.

2. Select Netmask from the Network Setup screen.

The IP Netmask screen displays.

5-21

Xerox

Wide Format 6622 Solution

™

User Guide

System Administration

Summary of Contents for Wide Format 6622





















































































































































































































Search results

Summary of Contents for Wide Format 6622

Reviews:

Related manuals for Wide Format 6622

Brands by name

Popular brands

Xerox Wide Format 6622, User Manual

Search results

Summary of Contents for Wide Format 6622

Reviews:

Related manuals for Wide Format 6622

Brands by name

Popular brands