Xerox Wide Format 6622, User Manual

Page: 165 / 212

User Mode 6 - U6 (Detack Lamp Control
Mode)
If the print quality of prints made on Film media lack sharpness or are too light in
appearance, a Detack Lamp in the print process can be switched Off using Mode 6. This
setting increases the amount of Toner transferred to the print.
1. With the printer in the Standby (idle) condition, press the Menu Key 6 times to enter
Mode 6.
The Menu Key lights and the display indicates U6 on the left side of the display and
the current setting on the right side.
2. Press Enter
3. Press the <-- key to decrease the value to 0 (Off)
The range is 1- On and 0 - Off
4. Press the Online Key to exit the User Mode.
NOTE
If a higher than normal jam rate is experienced, the Detack Lamp may have to
be switched on again.
NOTE
Factory default is 0, Off.
User Mode 7 - U7 (Attention Beeper
Enable Mode)
This mode controls a beeper sound whenever the printer needs attention. For example,
the printer will beep if it is out of paper or out of toner.
The beeper will switch off when the situation is corrected. It can also be temporarily
switched off by pressing the * key.
7-7
Xerox
®
Wide Format 6622 Solution
™
User Guide
User Modes