2. Rewind the media remaining on the roll.
3. Hold the roll at both ends and lift the roll out of the drawer. The roll must remain
parallel when removed.
4. Place the roll on a flat surface to change the roll.
CAUTION
Failure to keep the spindle parallel may cause the gear at the left end to break.
5. Press the green Media Locking Lever at the end of the Spindle.
6. Slide the Spindle out of the Media Core.
7. Press the green Media Locking Lever and insert the Spindle into the new roll of media.
8. Align the edge of the media with the appropriate Media Width Indicator.
NOTE
To ensure that the media roll will not slip on the Spindle, lift up on the green
Media Locking Lever after the roll is in position. This action provides a positive
grip on the Media Core.
NOTE
To avoid unnecessary strain, load the heaviest roll in the top drawer and the
lightest rolls in the bottom drawer.
1-29
Xerox
®
Wide Format 6622 Solution
™
User Guide
Product Overview
Summary of Contents for Wide Format 6622
