Xerox VersaLink B71 Series, User Manual

Page: 219 / 302

D O C U M E N T P R I N T S F R OM W R O N G T R AY
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
Application and print driver have conflicting tray
selections.
1 Check the tray selected in the print driver.
2 Access the page setup or printer settings of the
application from which you are printing.
3 Set the paper source to match the tray selected in
the print driver or set the paper source to
A
Auuttoom maattiiccaallllyy SSeelleecctt.
4 Check that you have the latest print driver installed.
For details, go to www.xerox.com/office/
VLB71XXsupport .
Note: To have the print driver select the tray, set
the tray used as the paper source to A
Auuttoo
SSeelleeccttiioonn EEnnaabblleedd.
A U TO M AT I C 2 - S I D E D P R I N T I N G P R O B L E M S
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
Unsupported or incorrect paper. Ensure that you are using the correct paper. Do not use
transparencies, envelopes, labels, or reloaded paper for
automatic 2-sided printing. For details, see
Supported
Standard Paper Sizes for Automatic 2-Sided Printing .
Incorrect setting. On the print driver Printing Options tab, select 22--ssiiddeedd
PPrriinnttiinngg.
P R I N T E R I S M A K I N G U N U S UA L N O I S E S
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
There is an obstruction or debris inside the printer. Power off the printer and remove the obstruction or
debris. If you cannot remove it, contact your Xerox
representative.
PA P E R T R AY D O E S N O T C LO S E
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The paper tray does not close fully. Some debris or an object is blocking the tray. Power off
the printer, then remove the obstruction or debris. If
you cannot remove it, contact your Xerox
representative.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
219
Troubleshooting