manualshive.com logo in svg

Xerox Docuprint 75, Software Manual

The Xerox Docuprint 75 user manual is your go-to resource for getting started with this cutting-edge printing solution. Download the comprehensive manual for free from manualshive.com to unlock a wealth of valuable instructions, troubleshooting tips, and step-by-step guides, ensuring optimal performance and effortless operation right from the start.

Share
Download
background image

Using LCDS Print Description Language

6-1

6.

Using PDL commands for graphics

Several PDL parameters are available for graphics handling. 
These include four OUTPUT command parameters (specified in 
the JDE) and six DJDEs. The following tables summarize those 
parameters. 

For a explanation of the OUTPUT command parameters, refer to 
the “OUTPUT command” section in the “Specifying print format 
parameters” chapter. 

Table 6-1. OUTPUT command parameters and functions for graphics

Option

Definition

OUTPUT GRAPHICS

Specifies if and how graphics will be processed in current job. 

OUTPUT IMAGE

Specifies initial scaling and positioning parameters for graphics in Batch 
mode.

OUTPUT PURGE

Specifies default disposition of document interleaved graphics at the end 
of a report.

OUTPUT UNITS

Specifies units of measure for positioning graphics.

Table 6-2. DJDE definitions for graphics

Option

Definition

ALTER DJDE

Specifies new imaging parameters for graphics previously referenced using 
HOLD statement.

BATCH DJDE

Marks beginning and end of online Batch mode graphic data.

CANCEL DJDE

Terminates option of the GRAPHIC DJDE.

GRAPHIC DJDE

Precedes interleaved graphic in data stream.

IMAGE DJDE

Specifies name, scaling, and positioning of a graphic printed. 

SAVE DJDE

Identifies document interleaved graphics not to be deleted or purged.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Panasonic DP-CL21 Series Operating Instructions Manual preview
DP-CL21 Series
Brand: Panasonic Pages: 9
Panasonic DP-CL21 Series Specifications preview
DP-CL21 Series
Brand: Panasonic Pages: 2
TallyGenicom 2440 Quick Start Manual preview
2440
Brand: TallyGenicom Pages: 38
Canon mg6400 series Quick Start Manual preview
mg6400 series
Brand: Canon Pages: 4
Xerox Phaser 6250DP Setup Manual preview
Phaser 6250DP
Brand: Xerox Pages: 2
Xerox Phaser 6280N Evaluator Manual preview
Phaser 6280N
Brand: Xerox Pages: 16
Ricoh SP C250SF Settings Manual preview
SP C250SF
Brand: Ricoh Pages: 4
Star Micronics TSP043E Series Hardware Manual preview
TSP043E Series
Brand: Star Micronics Pages: 24
Oki C9600 Series Disassembly & Reassembly Procedures preview
C9600 Series
Brand: Oki Pages: 45
Kyocera FS-2100D Quick Installation Manual preview
FS-2100D
Brand: Kyocera Pages: 24
Lexmark C6160 User Manual preview
C6160
Brand: Lexmark Pages: 142
A&D AD-8118B Instruction Manual preview
AD-8118B
Brand: A&D Pages: 102
Triumph Adler DC 2025 Instruction Handbook Manual preview
DC 2025
Brand: Triumph Adler Pages: 139
Oce im3512 Operation Manual preview
im3512
Brand: Oce Pages: 196
Konica Minolta bizhub 654 Using preview
bizhub 654
Brand: Konica Minolta Pages: 1
Dell 1135N Service Manual preview
1135N
Brand: Dell Pages: 169
Canon imageRUNNER C3120 Getting Started preview
imageRUNNER C3120
Brand: Canon Pages: 20
Canon imageRUNNER C3170 series Datasheet preview
imageRUNNER C3170 series
Brand: Canon Pages: 12

Brands by name

Popular brands

Load more brands