manualshive.com logo in svg

Xerox Docuprint 75, Software Manual

The Xerox Docuprint 75 user manual is your go-to resource for getting started with this cutting-edge printing solution. Download the comprehensive manual for free from manualshive.com to unlock a wealth of valuable instructions, troubleshooting tips, and step-by-step guides, ensuring optimal performance and effortless operation right from the start.

Share
Download
background image

Specifying input parameters

2-2

Using LCDS Print Description Language

Input processing functions

The following functions are part of input processing on the 
FreeFlow Print Server LCDS systems. 

Input processing online

For online printing, the LCDS data is transmitted from a host 
computer either directly or through a protocol converter. The 
FreeFlow Print Server LCDS systems receive print data either 
over a channel through bus and tag cables, or through the 
Socket Gateway or lpr using TCP/IP protocol.
The LCDS data stream emulates the IBM 3211 or 4245 line 
printer format. All commands coded for the 3211 may be coded 
for the 4245. In online 3211 mode, the data stream emulates an 
IBM 3211 line printer format, with or without embedded DJDEs.
Basic input processing functions are augmented by the following 
functions for online 3211 or 4245 mode operations:
•

Handling all interactions with the online interface hardware.

•

Building translate tables based on the present contents of the 
current FOLD or UNFOLD command that is in effect.

•

Processing form control buffers (FCBs) that are received 
from the host to redefine channel to line number 
assignments.

Specifying DJDE

processing online

Online printing is controlled through parameters from a user 
defined .JDL file. You can dynamically override these 
parameters by Dynamic Job Descriptor Entries (DJDEs).
The DJDEs that you specify are processed by the system as part 
of the input print data from the host. The IDEN command 
enables the system to identify DJDEs as commands and not part 
of the input data. Refer to the “IDEN command” section later in 
this chapter for information on the use and parameters of this 
command.
Nonprint files, such as font files, can be downloaded from the 
host using the FILE command. Refer to “FILE DJDE” in the 
“Using Dynamic Job Descriptor Entries (DJDEs)” chapter of this 
guide.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Lanier LD360 Brochure & Specs preview
LD360
Brand: Lanier Pages: 6
NCR RealPOS 7199 User Manual preview
RealPOS 7199
Brand: NCR Pages: 224
NCR SelfServ Checkout 7350 Instructions Manual preview
SelfServ Checkout 7350
Brand: NCR Pages: 20
Oki OKIPAGE14e Setup Manual preview
OKIPAGE14e
Brand: Oki Pages: 28
Oki OKIPAGE14e Limited Warranty preview
OKIPAGE14e
Brand: Oki Pages: 22
Canon image RUNNER 3045 Manual preview
image RUNNER 3045
Brand: Canon Pages: 14
Oki ES2024 User Manual preview
ES2024
Brand: Oki Pages: 512
Oki OKIFAX 5050 Specification Sheet preview
OKIFAX 5050
Brand: Oki Pages: 2
EBS Ink-Jet Systems Hi-Res EBS-2600 Manual preview
Hi-Res EBS-2600
Brand: EBS Ink-Jet Systems Pages: 3
Tally T2240/24 Operator'S Manual preview
T2240/24
Brand: Tally Pages: 28
Dascom T5040 User Manual preview
T5040
Brand: Dascom Pages: 146
Xerox WorkCentre 7328 Brochure & Specs preview
WorkCentre 7328
Brand: Xerox Pages: 8
Oki C7500 V2 Network Manual preview
C7500 V2
Brand: Oki Pages: 107
GCC Technologies LaserPro StellarMark IFII Series User Manual preview
LaserPro StellarMark IFII Series
Brand: GCC Technologies Pages: 111
Xerox Phaser 3140 Service Manual preview
Phaser 3140
Brand: Xerox Pages: 284
iDPRT SP410 User Manual preview
SP410
Brand: iDPRT Pages: 41
Ricoh IM C6500 Operating Instructions Manual preview
IM C6500
Brand: Ricoh Pages: 24
Lexmark CX510de Specifications preview
CX510de
Brand: Lexmark Pages: 2

Brands by name

Popular brands

Load more brands