Xerox Docuprint 75 Software Manual Download

Page: 166 / 506

Specifying input parameters

2-58

Using LCDS Print Description Language

VOLUME DBCS

Specifies the double-byte character printing mode. Allows
printing of data streams of intermixed single-byte and double-
byte characters.

Syntax

VOLUME DBCS = {YES | NO}

Options

Default

VOLUME EMTYPE

Specifies the emulation type with which the system will print text.

Syntax

VOLUME EMTYPE = {

}

Options

Default

YES

VOLUME EMTYPE

parameter: point

to note

This parameter is ignored for online printing unless one of the
following VOLUME HOST parameter options for online printing is
specified:
•

HOST=FUJITSU; FUJONL KANJI=YES

•

HOST=HITACHI; HITONL KANJI=YES

Table 2-60. VOLUME DBCS parameter options and definitions

Option

Definition

YES

Allows printing of a data stream of intermixed single-byte and double-byte
characters.

Allows printing only of single-byte characters.

Table 2-61. VOLUME EMTYPE parameter options and definitions

Option

Definition

Interprets the function codes and the specified print positions, using the
existing compatible formats.

Interprets function codes and the specified print positions using the format for
the host computer.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands