Xerox Docuprint 75 Software Manual Download Page 289

Page: 289 / 506

Specifying print format parameters

Using LCDS Print Description Language

4-49

OUTPUT COLLATE

Specifies whether pages will be printed collated (in ordered sets)
or uncollated.

Syntax

OUTPUT COLLATE = {YES | NO}

Options

Default

YES

OUTPUT

COLLATE

parameter: points

to note

•

If NTO1=YES, PDL overrides COLLATE=NO with
COLLATE=YES and notes this action with a warning in the
JSL.

•

If you have specified multiple copies, you cannot change the
value of the COLLATE parameter again within the report.

OUTPUT COPIES

Specifies the number of report copies to be printed.

Syntax

OUTPUT COPIES =

number

Options

Default

Table 4-45. OUTPUT COLLATE parameter options and definitions

Option

Definition

YES

Specifies that the output pages are collated.

Specifies that the output is not collated.

Table 4-46. OUTPUT COPIES parameter options and definitions

Option

Definition

number

Specifies the number of copies to be printed. This is an integer value from 1 to
32,767.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands