manualshive.com logo in svg

Xerox Docuprint 75, Software Manual

The Xerox Docuprint 75 user manual is your go-to resource for getting started with this cutting-edge printing solution. Download the comprehensive manual for free from manualshive.com to unlock a wealth of valuable instructions, troubleshooting tips, and step-by-step guides, ensuring optimal performance and effortless operation right from the start.

Share
Download
background image

Using Dynamic Job Descriptor Entries (DJDEs)

5-70

Using LCDS Print Description Language

STOCKS DJDE 

Identifies the stock set and its associated stock(s) to be used in a 
report. This stockset file (

STOCKSETNAME

.STK) must already 

have been created by a compiled JSL and must currently reside 
in the “lcds” resource folder on the system disk. 

Type

Page oriented

Syntax

STOCKS = 

stocksetname

Options

STOCKS DJDE: point to note

Whenever a new 

stockset

 is chosen, that is, at start of report or 

through a JDE or JDL switch via DJDE, the system verifies each 
stock to determine that the stock exists and can be made active. 
This verification provides an automatic method of changing 
stocks in the printer as required by the data stream.

TMODE DJDE 

Specifies a maximum paper width in order to improve throughput 
efficiency when using mixed paper sizes. Refer to the “OUTPUT 
TMODE” parameter section in the “Specifying print format 
parameters” chapter for an explanation of pitch mode.

NOTE:  This feature is not supported by the Nuvera MX series 
printers.

Type

Page oriented

Syntax

TMODE = (

width

 [, 

widthunit

])

Table 5-59. STOCKS DJDE options and 

definitions

Option

Definition

stocksetname

Name of the STOCKSET used in a report.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Qls 2000 Series Operation & Setup Manual preview
2000 Series
Brand: Qls Pages: 53
Xerox 2000 Series Operation Manual preview
2000 Series
Brand: Xerox Pages: 36
CAB A Series Programming Manual preview
A Series
Brand: CAB Pages: 263
Magicard Pronto Getting Started Manual preview
Pronto
Brand: Magicard Pages: 26
QMS 3260 Operation preview
3260
Brand: QMS Pages: 194
Panasonic Workio DP-3510 Service Handbook preview
Workio DP-3510
Brand: Panasonic Pages: 12
Panasonic Workio DP-3510 Service Manual preview
Workio DP-3510
Brand: Panasonic Pages: 858
Samsung SPP 2020 - Photo Printer - 20 Sheets Manual Del Usuario preview
SPP 2020 - Photo Printer - 20 Sheets
Brand: Samsung Pages: 81
Samsung ML-6000 Bedienungsanleitung preview
ML-6000
Brand: Samsung Pages: 98
Samsung ML-4050N Compatibility Manual preview
ML-4050N
Brand: Samsung Pages: 6
Samsung ML-3750ND User Manual preview
ML-3750ND
Brand: Samsung Pages: 203
Samsung ML-3312ND Manual Del Usuario preview
ML-3312ND
Brand: Samsung Pages: 264
Samsung ML-2165W/XAA Manual Del Usuario preview
ML-2165W/XAA
Brand: Samsung Pages: 228
Samsung ML-2165 User Manual preview
ML-2165
Brand: Samsung Pages: 211
Samsung ML-2525 Brochure & Specs preview
ML-2525
Brand: Samsung Pages: 5
Samsung ML-1865W Manual Del Usuario preview
ML-1865W
Brand: Samsung Pages: 92
Samsung ML-1865W User Manual preview
ML-1865W
Brand: Samsung Pages: 75
Samsung ML-6060 Technical Instructions preview
ML-6060
Brand: Samsung Pages: 11

Brands by name

Popular brands

Load more brands