Xerox Docuprint 75 Software Manual Download

Page: 163 / 506

Specifying input parameters

Using LCDS Print Description Language

2-55

The following sections describe the syntax of the VOLUME
command parameters and explain the parameter options.

VOLUME KANJI

Specifies double-byte character printing mode
and allows printing of data streams of
intermixed single-byte and double-byte
characters.

VOLUME KCODE

Specifies the double-byte character code
translation table that the system will use to
interpret the input data.

VOLUME LABEL

Specifies the type of label on the input tape.

VOLUME LCODE

Specifies the code translation table that will be
used in interpreting the tape label.

VOLUME LPACK

Specifies whether undefined labels are
packed or unpacked.

VOLUME MAXLAB

Specifies longest physical block that may be
treated as a label if the label is undefined.

VOLUME MINLAB

Specifies the shortest physical block that may
be treated as a label if the label is undefined.

VOLUME OPTIMIZE

Specifies throughput performance
enhancement.

VOLUME OSCHN

Specifies the channel that the system sill use
to signal the end of a report.

VOLUME OSHDP

Specifies the number of header banner pages
that precede the report.

VOLUME OSTLP

Specifies the number of trailer banner pages
that follow the report.

VOLUME RMULT

Specifies a multiplication factor used to
determine the true record length.

VOLUME TCODE

Specifies a set of type assignments that will
be used for masked comparisons.

VOLUME UNPACK

Specifies unpacking method of the input data
when unpacking is required.

VOLUME VCODE

Specifies a table of character type codes to
use for criteria testing in Value mode.

Table 2-56. Summary of VOLUME command parameters (Continued)

Parameter

Specifies

Online

Offline

DJDE

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands