manualshive.com logo in svg

Xerox Docuprint 75, Software Manual

The Xerox Docuprint 75 user manual is your go-to resource for getting started with this cutting-edge printing solution. Download the comprehensive manual for free from manualshive.com to unlock a wealth of valuable instructions, troubleshooting tips, and step-by-step guides, ensuring optimal performance and effortless operation right from the start.

Share
Download
background image

Using logical processing

3-38

Using LCDS Print Description Language

Options

Default

No default

RFEED command: points to note

•

Satisfaction of the RFEED criteria causes the current page to 
feed from the tray assigned to the stock defined in the 
RFEED command. 

•

If a criterion is met, the stock name remains in effect until the 
next RFEED criterion are met or a new report is processed. 

•

RFEED is not available as a DJDE. Instead, the FEED DJDE 
is available for similar functions. Refer to the “FEED DJDE” in 
the “Using Dynamic Job Descriptor Entries (DJDEs)” chapter 
of this guide.

•

In a multiple RFEED criteria command, the order in which the 
test expressions are specified makes a difference in the job 
application. After a test is satisfied, the system ignores 
RFEED checking for the rest of the page. RFEED checking 
resumes when a page transition occurs.
Consider the following example:

Table 3-28. RFEED TEST parameter options and definitions

Option

Definition

testexp

References a criteria table to be used to test for conditions that will cause the 
stock defined by the 

stock

 parameter option to feed for the next page.

Refer to “Coding a test expression” earlier in this chapter for the format and 
syntax of a 

testexp

.

stock

Defines the stock whose assigned tray(s) will be used for the page, (either a 
stock name or a stock reference). 

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Unisys 115 Operation/Reference Manual preview
115
Brand: Unisys Pages: 255
Xerox B210 User Manual preview
B210
Brand: Xerox Pages: 199
Oki B2200 Maintenance Manual preview
B2200
Brand: Oki Pages: 100
Oki B2200 Quick Setup Manual preview
B2200
Brand: Oki Pages: 2
Xerox B235 User Manual preview
B235
Brand: Xerox Pages: 316
Xerox B215 Get Started preview
B215
Brand: Xerox Pages: 74
Xerox B215 User Manual preview
B215
Brand: Xerox Pages: 306
Xerox B215 Quick Use Manual preview
B215
Brand: Xerox Pages: 16
Xerox B210 Quick Start Manual preview
B210
Brand: Xerox Pages: 4
Oki B2200 Guide Utilisateur preview
B2200
Brand: Oki Pages: 38
Oki B2200 Guía Del Usuario preview
B2200
Brand: Oki Pages: 38
Oki B2200 User Manual preview
B2200
Brand: Oki Pages: 36
Oki B2200 Safety & Warranty preview
B2200
Brand: Oki Pages: 36
Fastjet F500 Series Operation Manual preview
F500 Series
Brand: Fastjet Pages: 52
QMS 2425 Getting Started preview
2425
Brand: QMS Pages: 144
Raymarine e7 Installation And Operation Handbook preview
e7
Brand: Raymarine Pages: 135
Oki C3000 Series Manual preview
C3000 Series
Brand: Oki Pages: 62
TallyGenicom LA800 User Manual preview
LA800
Brand: TallyGenicom Pages: 144

Brands by name

Popular brands

Load more brands