Xerox Docuprint 75 Software Manual Download Page 293

Page: 293 / 506

Specifying print format parameters

Using LCDS Print Description Language

4-53

Options

Default

BIN

OUTPUT DUPLEX

Specifies whether printing is to occur in duplex (print on both
sides of a sheet) or simplex (print on a single side).

Syntax

OUTPUT DUPLEX = {YES | NO}

Options

Default

OUTPUT DUPLEX

parameter: point

to note

Transparencies cannot print in duplex.

OUTPUT FACEUP

Specifies that printed pages are delivered face up to the output
destination.

Syntax

OUTPUT FACEUP = {YES | NO}

Table 4-50. OUTPUT DESTINATION parameter options and definitions

Option

Definition

BIN

Specifies that the currently selected bin is used.

TRAY

Sends output to the sample tray.
Transparencies should always be sent to this tray.

NOTE: Use caution when selecting the TRAY option because of the limited
capacity of the sample tray (100 sheets).

EXPORT

Specifies that sheets be sent to the bypass transport to be fed into a finishing
device. The EXPORT option takes effect only if:
•

The user interface Output window has “System Specified” selected in the
Output Location field, and

•

The Finishing field displays the name of a finishing device.

Table 4-51. OUTPUT DUPLEX parameter options and definitions

Option

Definition

YES

Specifies two sided (duplex) printing.

Specifies single sided (simplex) printing.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands