manualshive.com logo in svg

Xerox Docuprint 75, Software Manual

The Xerox Docuprint 75 user manual is your go-to resource for getting started with this cutting-edge printing solution. Download the comprehensive manual for free from manualshive.com to unlock a wealth of valuable instructions, troubleshooting tips, and step-by-step guides, ensuring optimal performance and effortless operation right from the start.

Share
Download
background image

Using Dynamic Job Descriptor Entries (DJDEs)

5-40

Using LCDS Print Description Language

Options

Table 5-29. GRAPHIC DJDE options and definitions

Option

Definition

name

Identifies the graphic. 
If document interleaved, it becomes the file name with which the .IMG file is 
written. 
If page interleaved, it is used to associate the graphic with other DJDE 
references. 

vpos

vertical position

.

Specifies the amount of vertical spacing of the top edge of the graphic from 0,0 
on the physical page.

hpos

horizontal position

.

Specifies the horizontal spacing of the left edge of the graphic from 0,0 on the 
current physical page. 

units

Unit of measure for the vertical and horizontal positions of the graphic. The 
following may be used:
•

UN (unit defined by the user) 

•

CM (centimeters)

•

IN (inches)

•

DOTS

•

XDOTS (DOTS for 600 spi processing) 

If UN is specified, the user defined positioning unit must be previously defined 
by the OUTPUT UNITS command in the current JDE or JDL.
The default positioning unit is IN. 

H

HOLD
Specifies that the same graphic is to be held and imaged without further 
callouts at the same position and with the same scale factor at all subsequent 
pages until changed by a DJDE CANCEL or ALTER DJDE.

n/d

numerator/denominator

Specifies the reference scale factor. Each option, 

n 

and 

d

, must be an integer 

in the range of 1 to 8, thereby allowing a reference scale factor in the range of 
1/8 to 8. The reference scale factor is multiplied by the internal scale factor of 
the image.

INKS

Specifies that the ink references that follow will override the inks that were 
defined in the image file.

inkref

ink reference

Specifies the inks that override the corresponding inks specified in the ink list of 
the image file. 

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

F+D Feinwerk- und Drucktechnik Plus Software Manual preview
Plus
Brand: F+D Feinwerk- und Drucktechnik Pages: 41
Wasp WPL305 Quick Start Manual preview
WPL305
Brand: Wasp Pages: 2
Canon ip1500-srm Simplified Service Manual preview
ip1500-srm
Brand: Canon Pages: 21
Canon PIXMA iP2700 Simplified Service Manual preview
PIXMA iP2700
Brand: Canon Pages: 23
FujiFilm Apeos 5580 Reference Manual preview
Apeos 5580
Brand: FujiFilm Pages: 37
Kodak 8437477 - EasyShare ESP 9 All-In-One Printer User Manual preview
8437477 - EasyShare ESP 9 All-In-One Printer
Brand: Kodak Pages: 143
Xerox 212 DC Product Safety Data Sheet preview
212 DC
Brand: Xerox Pages: 2
Xerox AltaLink B8045 Security Manual preview
AltaLink B8045
Brand: Xerox Pages: 70
SAGEMCOM Agoris M943 User Manual preview
Agoris M943
Brand: SAGEMCOM Pages: 146
Oce TDS860 User Manual preview
TDS860
Brand: Oce Pages: 330
Xerox 8200DX - Phaser Color Solid Ink Printer Manual preview
8200DX - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 2
SPRT SP-POS88V User Manual preview
SP-POS88V
Brand: SPRT Pages: 18
Citizen CT-S251 User Manual preview
CT-S251
Brand: Citizen Pages: 255
Kyocera ECOSYS FS-C2126MFP Operation Manual preview
ECOSYS FS-C2126MFP
Brand: Kyocera Pages: 206
Epson C11CA19201 - WorkForce 30 Color Inkjet Printer Quick Manual preview
C11CA19201 - WorkForce 30 Color Inkjet Printer
Brand: Epson Pages: 36
Epson C11CA19201 - WorkForce 30 Color Inkjet Printer Specification Sheet preview
C11CA19201 - WorkForce 30 Color Inkjet Printer
Brand: Epson Pages: 3
Epson C11C694201 - PictureMate Dash PM 260 Color Inkjet Printer User Manual preview
C11C694201 - PictureMate Dash PM 260 Color Inkjet Printer
Brand: Epson Pages: 72
Epson C11C638001 - LQ 300+II B/W Dot-matrix Printer User Manual preview
C11C638001 - LQ 300+II B/W Dot-matrix Printer
Brand: Epson Pages: 120

Brands by name

Popular brands

Load more brands