Xerox Docuprint 75 Software Manual Download Page 393

Page: 393 / 506

Using Dynamic Job Descriptor Entries (DJDEs)

Using LCDS Print Description Language

5-39

GDATA DJDE

Specifies the starting point of the graphic data from the
beginning of the user portion of a data record.

Type

Record oriented

Syntax

GDATA =

offset

termination

Options

GRAPHIC DJDE

Specifies that the DJDE is a graphic sentinel. That is, it
immediately precedes and identifies a graphic in the report data
stream.

NOTE: This DJDE, when specified, must be the only DJDE in its
packet.

Type

Record oriented

Syntax

GRAPHIC = (

name

vpos

[

units

hpos

[

units

], [,H] [,

]] [,

(INKS,

inkref

])])

(If no other DJDEs are specified, the parentheses may be
omitted.)

Table 5-28. GDATA DJDE options and definitions

Option

Definition

offset

The starting point within the record of the graphic data that will be downloaded.

termination

The terminating byte of the record. The options are:
•

DEFAULT
–

If online, a single terminating byte exists.

–

If offline, no terminating byte exists.

•

: The number of terminating bytes that exist

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands