Xerox Docuprint 75 Software Manual Download Page 257

Page: 257 / 506

Specifying print format parameters

Using LCDS Print Description Language

4-17

CME POSITION

Specifies the initial character position at which to begin to apply
the CME in the print line.

Syntax

[

:] CME POSITION =

Options

Default

CME command: points to note

•

The CME LINE and POSITION parameters are order
dependent; that is, LINE must always precede POSITION.

•

Data lines

: The position of the line is altered to

accommodate the line with a larger font.

•

Multiple copies

: If a multicopy report is aborted before all the

pages are processed, one copy is printed if the CMEs are
copy sensitive. Otherwise, all copies of the setup pages are
printed.

•

CMEs are not applied if OVERPRINT=MERGE and
FONTINDEX are

both

specified.

•

If an

indefinite

range is specified (for example,

10 –

), CMEs

are applied only up until the last print line for the page.
If a

definite

range is specified (such as

10, 15

), CMEs are

applied regardless of whether or not variable data appears on
those lines.

•

Multiple lines and columns

: You may specify multiple lines

and multiple columns for each line.
– Multiple line specifications must be given in ascending

(top to bottom of page) order.

– Multiple column specifications for a line range must be

given in ascending (left to right) order.

Table 4-19. CME POSITION parameter option and definition

Option

Definition

An integer value in the range of 1 (the first position of the print line) and the
value specified by the

length

option of the LINE DATA parameter.

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands