Xerox Docuprint 75 Software Manual Download Page 346

Page: 346 / 506

Specifying print format parameters

4-106

Using LCDS Print Description Language

STOCKSET command parameters

The following table summarizes the STOCKSET command
parameters.

STOCKSET ASSIGN

Associates stocks with an identified

stock reference

or with other

stocks to create a stock set that will be used together in an
application.

Syntax

[

]: STOCKSET ASSIGN = (

stockdescriptor

] [,...])

Options

Default

No default

Example of use of

STOCKSET

ASSIGN

ASSIGN = ((’F1302’, COVER),(’F1415’, BODY))

Table 4-90. Summary of STOCKSET command parameters

Parameter

Specifies

Online

Offline

DJDE

STOCKSET ASSIGN

Lists stock names and associates them with
stock references.

STOCKSET INIFEED

Specifies which stock to use in the absence of
any designation in the OUTPUT FEED
parameter.

STOCKSET
SYSPAGE

Specifies the stock on which system
generated pages will print.

Table 4-91. STOCKSET ASSIGN parameter options and definitions

Option

Definition

stockdescriptor

Can have one of the following formats:
•

‘

stockname

’

•

(

’stockname’, stockreference

)

•

(

‘stockname’, stockreference

stockreference

[,...]])

•

Stockname

is the specific name of a stock. It is

enclosed in single quotes.

•

Stockreference

is an alternate term for referencing

the named stock. It is common to assign the

stockreference

according to its function in the job or

some other characteristic.

stockreference

may be assigned to only one

stockname

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands