Xerox Docuprint 75 Software Manual Download Page 171

Page: 171 / 506

Specifying input parameters

Using LCDS Print Description Language

2-63

VOLUME KCODE

Specifies which double-byte character code translation table the
system will use to interpret the input data.

Syntax

VOLUME KCODE = {

keyword

}

Options

Default

No default

VOLUME LABEL

Specifies the type of label on the input tape.

Syntax

VOLUME LABEL =

label type

Options

Table 2-66. VOLUME KCODE parameter options and definitions

Option

Definition

keyword

Specifies a specific, standard, system defined double-byte code translation
table. The available options are:
•

IBM: IBM Nihongo character set (Kanji double-byte character sets)

•

IBMCHN: IBM 5550 code translation table

•

JEF: Fujitsu JEF Kanji double-byte character set

•

KEIS: Hitachi KEIS Kanji double-byte character set

•

UCS2: ISO/IEC 10646 UCS2 character set

•

USER: Refers to the single unlabeled KCODE command defined within the
JDL or JDE.

Specifies an identifier label that was used in a previously defined KCODE
command to refer to a specific, user-defined code translation table. The

label

is required when multiple KCODE commands are contained within the JDL.

Table 2-67. VOLUME LABEL parameter options and definitions

Option

Definition

label-type

Specifies the type of label that the tape contains. The following types
may be specified:
•

COBOL (Honeywell 2000 COBOL tape with 120-byte labels)

•

NONE (the input tape is unlabeled)

•

ANSI/XEROX ANSI

•

SPR (Honeywell 2000 System Print Tape)

•

STANDARD

•

UNDEF (Input tape label is not defined)

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands

Xerox Docuprint 75, Software Manual

Search results

Summary of Contents for Docuprint 75

Reviews:

Related manuals for Docuprint 75

Brands by name

Popular brands