Xerox Docuprint 75 Software Manual Download | Manualshive

Page: 273 / 506

background image

Specifying print format parameters

Using LCDS Print Description Language

4-33

Options

Default

(PRINT, NODISP)

LINE OVERPRINT
parameter: points

to note

FONTINDEX and OVERPRINT:

When used in conjunction with

OVERPRINT, FONTINDEX is handled as follows:
•

For OVERPRINT=PRINT, the printing system overprints
records analogously to an impact printer if the fonts are the
same size. If the fonts differ, records are overprinted without
regard to character spacing.

•

For OVERPRINT=MERGE, the system replaces blank
characters in the previously printable line, if this print record
overprints the line. Character spacing values are adjusted;
thus, proportionally spaced or different size fonts may be
used, and the system performs the character placement.
Blank characters in the previous printable line are replaced
only when they are translated using the CODE table into an
ASCII X’20’ or into a character value greater than that of the
highest character in the specified font.

Table 4-35. LINE OVERPRINT parameter options and definitions

Option

Definition

overopt

overprint option

.

This option has the following choices:
•

PRINT:

Specifies that all overprint lines are printed as they would be on an

impact printer; that is, the second line is printed over the top of the first with
no regard to the previous data, including character spacing, which may
vary between the two lines of data.

•

IGNORE:

All overprint lines are ignored.

•

MERGE:

Same as PRINT except when used with FONTINDEX or CME

processing. Refer to 1) the “LINE OVERPRINT parameter: points to note”
section below and, 2) Example 2 of the “Examples” section for this
parameter.

•

PRINT2:

Specifies that up to two consecutive lines are printed per line; that

is, one line and one overprint. Other overprints for the line are ignored.

disp

display

.

This option has the following components:
•

DISP

•

NODISP

NOTE: This option is not functional on the FreeFlow Print Server LCDS
systems. It is preserved here for compatibility with other Xerox laser printing
systems. The number of overprint lines is always printed on the accounting
page.

«
...
271
272
273
274
275
...
»

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Brand: Oki Pages: 95

Brand: Geeetech Pages: 52

Brand: Olivetti Pages: 149

Brand: NBS Technologies Pages: 64

Brand: Oki Pages: 20

Brand: Lexmark Pages: 2

AcuLaser CX11 Series

Brand: Epson Pages: 668

Brand: Brother Pages: 93

AGEP50 - COLOR VIDEO PRINTER

Brand: Panasonic Pages: 40

Brand: Oki Pages: 8

Brand: Lexmark Pages: 8

Brand: Xerox Pages: 134

WorkCentre 3119

Brand: Xerox Pages: 86

WorkCentre 3225

Brand: Xerox Pages: 222

3150 - Phaser B/W Laser Printer

Brand: Xerox Pages: 116

Brand: CAB Pages: 118

WorkCentre 6655

Brand: Xerox Pages: 4

Brand: SII Pages: 197

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands