Xerox Docuprint 75 Software Manual Download Page 401 | Manualshive

Page: 401 / 506

background image

Using Dynamic Job Descriptor Entries (DJDEs)

Using LCDS Print Description Language

5-47

Options

IRESULT DJDE

Specifies what the result will be when objects that are imaged
with different inks overlap.

Type

Page oriented

Syntax

IRESULT = {DEFAULT | BLACK | COLOR}

Options

IRESULT DJDE: points to note

•

For monochrome printers, the COLOR and BLACK
parameters produce identical results (black).

•

The color that results from overlapping objects may be only
black or only colored for an entire page. For example, a page
cannot have red text printed over a black background and
also black text printed over a red background.

Table 5-36. INVERT DJDE options and definitions

Option

Definition

FRONT

Specifies page inversion on front sides.

BACK

Specifies page inversion on back sides.

BOTH

Specifies page inversion on both front and back sides.

NONE

Specifies no page inversion.

Table 5-37. IRESULT DJDE options and definitions

Option

Definition

DEFAULT

Specifies that the ink that was set as the system default IRESULT ink will
override when two different colored pixels overlap. The default IRESULT ink
may be black or colored.

NOTE: On the FreeFlow Print Server-based DT 128/155/180 HLC Printing
Systems, the default is Black.

BLACK

Specifies that, when two objects that are imaged with different inks overlap,
and black and colored pixels coincide, the resulting pixel is black.

COLOR

Specifies that, when two objects that are imaged with different inks overlap,
and black and colored pixels coincide, the resulting pixel is colored.

«
...
399
400
401
402
403
...
»

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Brand: Oki Pages: 152

Brand: Oki Pages: 140

Brand: Oki Pages: 181

Brand: Oki Pages: 52

Brand: Oki Pages: 229

Brand: Oki Pages: 224

Brand: Oki Pages: 141

Brand: Oki Pages: 160

Brand: Oki Pages: 48

Brand: Oki Pages: 20

Brand: Oki Pages: 52

Brand: Oki Pages: 127

Brand: Oki Pages: 128

Brand: Oki Pages: 12

Brand: Oki Pages: 41

Brand: Oki Pages: 35

Brand: Oki Pages: 165

Brand: Oki Pages: 262

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands