manualshive.com logo in svg

Xerox Docuprint 75, Software Manual

The Xerox Docuprint 75 user manual is your go-to resource for getting started with this cutting-edge printing solution. Download the comprehensive manual for free from manualshive.com to unlock a wealth of valuable instructions, troubleshooting tips, and step-by-step guides, ensuring optimal performance and effortless operation right from the start.

Share
Download
background image

Using Dynamic Job Descriptor Entries (DJDEs)

Using LCDS Print Description Language

5-43

Options

IDFAULT DJDE: point to note

Only saturated primary colors can be specified by this DJDE.

IDR DJDE

Specifies the ink descriptor entry that will be used for subsequent 
pages. Refer to the “IDR command” section in the “Specifying 
print format parameters” chapter for an explanation of what is 
defined in an IDR.

Type

Page oriented

Syntax

IDR = 

idrname

Options

ILIST DJDE

Specifies a list of all the inks that may be referenced by the ink 
index on the page.

Type

Page oriented

Syntax

ILIST = 

‘inkname

’ | (

‘inkname

1

’, [

‘inkname

2

’] [, ...])

Table 5-31. IDFAULT DJDE options and definitions

Option

Definition

‘

inkref

’’

ink reference

The default ink that will be used for all objects that do not specify an ink. 

Table 5-32. IDR DJDE options and definitions

Option

Definition

idrname

ink descriptor reference name

The name of the IDR (previously defined by an IDR command in the JSL) that 
will be used for subsequent pages. 

Summary of Contents for Docuprint 75



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Docuprint 75

Eaton Power Defense PD3 Mounting And Operating Instructions preview
Power Defense PD3
Brand: Eaton Pages: 4
QMS Magicolor 6100 Supplementary Manual preview
Magicolor 6100
Brand: QMS Pages: 2
Xerox Phaser 7300DN Setup And Quick Reference Manual preview
Phaser 7300DN
Brand: Xerox Pages: 44
Oki LP441s Guía Del Usuario preview
LP441s
Brand: Oki Pages: 76
BIXOLON 275C - SRP Two-color Dot-matrix Printer User Manual preview
275C - SRP Two-color Dot-matrix Printer
Brand: BIXOLON Pages: 100
Ricoh Pro L5130e Settings Manual preview
Pro L5130e
Brand: Ricoh Pages: 44
Intellisystem ThermalTronix TT-1025EX-MIL User Manual preview
ThermalTronix TT-1025EX-MIL
Brand: Intellisystem Pages: 11
Canon PIXMA E300 series Getting Started preview
PIXMA E300 series
Brand: Canon Pages: 28
Canon MultiPASS F60 Basic Manual preview
MultiPASS F60
Brand: Canon Pages: 115
Canon MF754Cdw Important Safety Instructions Manual preview
MF754Cdw
Brand: Canon Pages: 124
Canon MP-C635 User Manual preview
MP-C635
Brand: Canon Pages: 216
Canon PIXMA iP7200 Series Setup Manual preview
PIXMA iP7200 Series
Brand: Canon Pages: 5
Epson workforce wf-2630 User Manual preview
workforce wf-2630
Brand: Epson Pages: 256
Epson WorkForce Pro WP-4595 DNF Setup Manual preview
WorkForce Pro WP-4595 DNF
Brand: Epson Pages: 2
Epson WorkForce WF-2540 User Manual preview
WorkForce WF-2540
Brand: Epson Pages: 283
Epson WorkForce ST-C4100 User Manual preview
WorkForce ST-C4100
Brand: Epson Pages: 333
Epson WorkForce WF-2540 Specifications preview
WorkForce WF-2540
Brand: Epson Pages: 2
Lexmark 21Z0180 - C 935hdn Color Laser Printer Brochure preview
21Z0180 - C 935hdn Color Laser Printer
Brand: Lexmark Pages: 2

Brands by name

Popular brands

Load more brands