Xerox COPYCENTRE M20I User Manual Download Page 50

Page: 50 / 215

Page 2-26

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide

ett

ing St

arted

Workstation Setup

You will need to configure the printer drivers.

At the

Workstation

, select [Printers and Faxes] from the

Control Panel

option.

)

The location of this window will vary according to the operating system: from the Start>Settings

menu or directly from the Start menu.

The

Printers and Faxes

window will be displayed.

)

This window will have a different appearance according to the operating system of the

workstation. The window displayed is for a Windows XP operating system.

Click on the

Printer

and select [Properties] from the

File

menu or the right mouse menu.

A properties window will be displayed.

Summary of Contents for COPYCENTRE M20I
























































































































































































































Search results

Summary of Contents for COPYCENTRE M20I

Reviews:

Related manuals for COPYCENTRE M20I

Brands by name

Popular brands

Xerox COPYCENTRE M20I, User Manual

Search results

Summary of Contents for COPYCENTRE M20I

Reviews:

Related manuals for COPYCENTRE M20I

Brands by name

Popular brands