Xante Accel-a-Writer 3 Series, User Manual

Page: 57 / 320

_____________________________________ Macintosh Setup 3-19
QuarkXPress PDF Folder
The APP Drivers: QuarkXPress PDF folder contain PDFs (Printer
Description Files) for each XANTÉ printer. QuarkXPress versions
3.3.X and earlier require these files in addition to the PPD to ensure the
highest quality output from your printer and QuarkXPress.
XInstaller loads the QuarkXPress PDF if you choose an individual
printer installation. To load these PDFs manually
1. Load and configure the Adobe PostScript printer driver and
your printer’s PPD following instructions in “Adobe PostScript
Printer Drivers” earlier in this chapter.
2. Copy your printer’s PDF from the CD-ROM’s App Drivers:
QuarkXPress PDF folder to the appropriate folder on your
Macintosh.
• For versions 3.3.X and earlier, copy the XANTÉ 3-
Series Printer PDF to the QuarkXPress application/PDF
folder.
Note: The PDF’s name indicates the XANTÉ printer it
supports. A “W” after the PDF name indicates it is for
a printer with the wide format option.
QuarkXPress 4.X uses your printer’s PPD file (it does not need a
PDF). To load a PPD file manually, copy your printer’s PPDs from
the CD-ROM’s Printer Descriptions folder to the System Folder:
Extensions: Printer Descriptions folder on your Macintosh.
Note: Remove “Balloon Help” from the Quark folder for
QuarkXPress 3.3.2.
See the QuarkXPress section in appendix B for additional information.