Xante Accel-a-Writer 3 Series, User Manual

Page: 171 / 320

_______________________________________ Ethernet Setup 5-31
5. Click on your printer’s name. When a prompt appears asking
“Do you want to capture AppleTalk printing device,” click Yes
to make NT a print server for your network.
Note: If you select Yes, NT hides the AppleTalk name from
the Macintosh Chooser. If you select No, the
Macintosh can still print directly.
6. Select the General tab; then, click Print Test Page and check
the printer to see if the Windows NT Test Page printed
correctly.
7. Click OK. The Printer Properties window closes.
8. Select File: Close. The Printers window closes.
After installing and configuring the AdobePS printer driver and PPD,
see “Configuring the Printer” in chapter 4 to verify that printer
interfaces are configured properly.
NetBEUI Configuration
NetBEUI (NetBIOS Extended User Interface) is the Microsoft
Windows networking interface standard for Windows 95 and 98,
Workgroups, Microsoft LAN Manager and MS-DOS’s Workgroup
add-on). On a Windows 95 or 98 system, NetBEUI installs using the
procedure later in this section. Configuration consists of simply
setting the computer name and a workgroup or domain name.
Note: A NetBEUI setup is limited to 25 or fewer users.
NetBEUI features fast communication, self-tuning performance, low
overhead, and very little configuration. However, it is not routable.
NetBEUI Constraints
When you work with your XANTÉ printer and NetBEUI, you need
to keep the following constraints in mind.