Xante Accel-a-Writer 3 Series, User Manual

Page: 286 / 320

11-4 Troubleshooting bb ____________________________________
E:MOTOR
There is a hardware problem with the
motor.
EXIT PAPER JAM
A media jam has occurred after the
paper has been printed but before it has
been deposited in the output tray.
FRONT COVER OPEN
The multipurpose feeder cover is open.
FRONT PAPER JAM
A media jam has occurred caused by the
media not being pulled from the tray
properly.
FULL STACK
The output tray is full.
FUSER COVER OPEN
The fuser cover is not closed properly.
HOLDING The printer is offline and data is coming
across one (or more) of the interfaces.
The printer cannot receive the data when
it is offline.
INITIALIZING
The printer is warming up and
performing setup routines.
LATE PAPER JAM
A media jam has occurred caused by the
media not reaching the exit roller at the
correct time.
LOW PAPER
The paper stack is low in the selected
cassette or optional 2,000 sheet feeder.
The message appears during each paper
feed when the paper stack is fewer than
approximately 25 pages.
LOW TONER
Toner in the cartridge is low or needs to
be redistributed.
NO TONER CART
The toner cartridge is either not in the
printer or not seated in place.