Xante Accel-a-Writer 3 Series, User Manual

Page: 54 / 320

3-16 Macintosh Setup bb ____________________________________
6. Click OK in the Autosetup failed dialog box; the Installable
Options window appears (fig. 3.6).
Fig. 3.6 Installable Options Window
7. Configure the printer’s options.
a. Select Installed for the upgrades installed on your
printer.
Note: If your printer has two cassette trays, select
Upper Optional Tray: Installed. If it has three
cassettes, select Upper Optional Tray: Installed
and Lower Optional Tray: Installed.
b. Select True for Spooler Enabled to activate the Save
Spooled Job menu in your application Print dialog box if
your system has an optional internal hard disk.
Note: This does not enable the Spooler on your printer.
The Spooler must be enabled on your printer using
either the front panel Interface menus or XANTÉ
Command Center. See “Spooler” in chapter 6 and
“Spooler” later in this chapter for details.
c. Select the amount of RAM installed on your printer.
8. Click OK twice. The Chooser window reappears. Then, close
this window.