Xante Accel-a-Writer 3 Series User Manual Download Page 254

Page: 254 / 320

10-6 Options

__________________________________________

Warning!

The printer weighs approximately 58.5 lbs (26.5 kg)

without

the toner, cassettes, and media installed.

Always

have two people lift the printer using the

recessed grip areas on the right and left sides.

Lift the printer over the feeder and align the two stubs on the
feeder with the holes on the bottom of the printer (fig. 10.2).

Fig. 10.2 Align the Printer over the Feeder

Lower the printer onto the feeder. The feeder’s stubs should fit
easily into the holes on the printer.

Summary of Contents for Accel-a-Writer 3 Series

































































































































































































































































































































Search results

Summary of Contents for Accel-a-Writer 3 Series

Reviews:

Related manuals for Accel-a-Writer 3 Series

Brands by name

Popular brands

Xante Accel-a-Writer 3 Series, User Manual

Search results

Summary of Contents for Accel-a-Writer 3 Series

Reviews:

Related manuals for Accel-a-Writer 3 Series

Brands by name

Popular brands