Xante Accel-a-Writer 3 Series, User Manual

Page: 173 / 320

_______________________________________ Ethernet Setup 5-33
Note: If you already have NetBEUI installed as a protocol,
skip step 4.
4. Click Add, Protocol, Microsoft, and NetBEUI. Then, press
OK. You may need the Window 95/98 OS CD to install the
necessary drivers. If so, insert the CD in your CD-ROM drive
and click OK.
Note: If you already have Client for Microsoft Networks
installed as a client, skip step 5.
5. Click Add, Client, Microsoft, and Client for Microsoft
Networks. Then, click OK.
6. Click NetBEUI under Network Configuration and click
Properties. Under Advanced Properties, select “Set this
protocol to be the default protocol.” Then, click OK.
Make sure your PC is connected to the network properly. You will
need to restart your computer for the new network changes to take
affect.
Note: MS Networks can delay updating the network for a few
minutes.
Print Queue Setup
Once your PC is restarted with the new network changes, you can
establish a print queue to your XANTÉ printer.
1. Run the Adobe PostScript printer driver installation.
2. Select Network Printer.
3. Click Browse. Click “+” to the left of Entire Network. A
domain called XANTÉ Printer should appear if a XANTÉ
printer with NetBEUI interface is on the network.
4. Click “+” to the left of XANTÉ printers to see a list of printers.