Xante Accel-a-Writer 3 Series, User Manual

Page: 211 / 320

_______________________________________ Configuration 6-37
Start-up Page
The Start-up Page feature prints a page that lists the selected resolution,
installed RAM, hard disk identities, page count, enabled interfaces, and
network information (if the Ethernet upgrade is installed) each time the
printer is turned on.
Set Start-up Page from the MISC:STRTUP PAGE configuration
menu, from XANTÉ Command Center on a Macintosh, or by
downloading Adobe PostScript files to the printer.
In the MISC:STRTUP Page menu, Yes (the factory default) enables
the feature and No disables it. In XANTÉ’s Macintosh Command
Center, the General: Startup Page menu allows you to turn the
Start-up Page feature on or off or to print this page on demand.
XANTÉ Utilities CD-ROM contains the PostScript files Startpg.on
and Startpg.off. Download these files to the printer to enable
(Startpg.on) or disable (Startpg.off) the feature. See “Downloads
Folder” in chapter 3 (Macintosh) and “PS_Files Folder” in chapter 4
(PC) for instructions.
To print a start-up page manually, take the printer off line and press
the Test key. After the page prints, press the Online key to put the
printer back on line.
Toner Cartridge Control
If your printer does not produce the rich, black images that you
expect, try redistributing the toner in the cartridge and adjusting the
print density before replacing the toner cartridge.
Redistributing Toner
If you have not used the toner cartridge in several days, toner may
have settled. Remove the cartridge from the printer, and shake the
cartridge gently to redistribute toner. Replace the cartridge in the
printer. See “Toner Cartridge” in chapter 2.