Xante Accel-a-Writer 3 Series User Manual Download Page 262

Page: 262 / 320

10-14 Options

__________________________________________

Connect the feeder’s built-in power cord to the power
receptacle on the back of the printer (fig. 10.12).

Fig. 10.12 Connect the Power between the Feeder and the Printer

10.

Plug the AC power cord into the sheet feeder’s power
receptacle and into a properly grounded AC outlet.

11.

Insert all paper cassettes into the printer (figs. 2.16 and 2.17).

12.

Turn on the feeder (fig. 10.13) and the printer.

Fig. 10.13 Turn on the 2,000 Sheet Feeder

Summary of Contents for Accel-a-Writer 3 Series

































































































































































































































































































































Search results

Summary of Contents for Accel-a-Writer 3 Series

Reviews:

Related manuals for Accel-a-Writer 3 Series

Brands by name

Popular brands

Xante Accel-a-Writer 3 Series, User Manual

Search results

Summary of Contents for Accel-a-Writer 3 Series

Reviews:

Related manuals for Accel-a-Writer 3 Series

Brands by name

Popular brands