Page 26
How Do I Set Up for External Surround Sound?
If a studio or other monitoring environment contains a surround sound system, it
may be advantageous to connect the monitored sound from the AMP2-16V Series
monitor to this system. Up to six pairs (12 channels) of analog or AES outputs are
available for this use.
or
AES Output
Configuration Menu
Configuration Selection
Menu
Main Screen
Audio
Processors
Audio Processor Card Menu
Analog -or- AES Output
Card Configuration
Analog Output
Configuration Menu
Figure 3–6: Analog Output Configuration Menu
Save / Exit
Help
Cancel
Mute
With
Phones
Yes
Analog Output Slot 3 Configuration
Menu
Free Mix
Follow
Monitor
Follow
Monitor
+0
+0
+0
+0
L. Front
R. Front
Center
LFE
Yes
Yes
Select
Affect
Main
Volume
Affect
Mixer
Channel
Select
Output
Trim
Output 1
Output 2
Output 3
Output 4
7.1 Outputs
Height
Output
Group
Select
1.
Press the Follow Monitor / Free Mix knob to select Follow Monitor, as
shown in the figure below.
2.
The Select Affect and Main Volume Affect controls should be set to Yes,
so that the channels selected on the Main Screen will be heard and the
volume control will adjust the surround sound.
3.
If needed, rotate the Output Trim control to adjust the output of each
channel to match the needs of the external surround sound system. The
Mixer Channel Select control is used in conjunction with the Output Trim to
select the channel to adjust.
4.
To turn off the internal speakers so that only the surround speakers produce
audio, use the Speaker Mute control in the Monitor Mixer Configuration
Menu.
