Page 14
Figure 1–15: Preset Management Menu
Preset Management Menu
Save / Exit
Help
Cancel
Preset 4:
User Preset 4
Preset 1:
User Preset 1
Preset 1:
User Preset 1
Current Config
Current Settings
Preset 1:
User Preset 1
Preset 4:
User Preset 4
Clear
Preset
Rename
Preset
Save
Current
Config
Copy
From
Copy To
Recall
On
Powerup
1.
From the Main Screen, press Menu to display the Configuration Selection
Menu.
2.
From the Configuration Selection Menu, press the Manage Presets knob
to display the Preset Management Menu.
3.
Rotate the Save Current Config control to the number of the preset you
would like to save the configuration into and then press the knob.
4.
You will be presented with the opportunity to name the preset. Typically a
short name describing the use of the configuration is appropriate. For
example, if the preset will select a number of AES channels for monitoring,
name the preset, AES.
Getting Support
Should you need to contact Wohler’s customer support line (see page ii for our
contact information), you will save time on the phone by writing down the software
and hardware versions installed in your monitor. Refer to the
section in Chapter 3 of this manual
for instructions.
