Page 83
associated with the currently-selected bitstream (if any). For more information,
refer to 4. Select the Metadata to Display on the Screen in Chapter 1 or to
How Do I Monitor Dolby Bitstreams? in Chapter 3.
The purpose of this menu is to set up a number of parameters related to decoding
Dolby bitstreams in the AMP2-E16V. These parameters include:
1.
Selecting the source of the Dolby bitstream
2.
Commands are provided to control the action of the Dolby decoder card.
3.
CRC error reporting can be turned On or Off.
4.
Metadata can be reviewed.
For convenience, you can access the Dolby Decoder Configuration menu as one of
the Audio Processor cards:
Configuration Selection
Menu
Main Screen
Menu
Audio
Processors
Audio Processor Card Menu
Dolby Card
Configuration
Dolby Decoder
Configuration Menu
Or, while selecting metadata to appear on the main screens:
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen
Main Screen
Configuration Menu
Metadata
Select
Metadata Select Menu
Metadata Source
Dolby Decoder
Configuration Menu
1.
Decoder Source: Rotating this knob selects the Dolby bitstream source to
be decoded:
a)
Any AES pair,
b)
Any de-embedded AES pair from an SDI input,
c)
Any TOSLINK/SPDIF input
