Page 9
If you select a Main Screen arrangement that includes data, proceed to the
following section to specify exactly what data you want to display.
4. Select the Metadata to Display on the Screen
Status Data:
If you do not wish to display status data, continue on to SMPTE 2020
Metadata on the next page.
1.
From the Main Screen Configuration Menu, press the Status Select knob
to display the Status Select Menu (Figure 1–9).
Figure 1–9: Status Select Menu
Status Select Menu
Help
Save / Exit
Cancel
Line
Select
Status
Page 3
Text
Color
Font
Size
Data
Select
Preset Name
Dolby Line Position Pair 5: N/P
Dolby Line Position Pair 6: N/P
(HD) 1920x1080/29.97i
SDID Embedding Method: B
[Empty]
Dolby Line Position Pair 1: 24
Dolby Line Position Pair 2: N/P
S2020 SDIDs Present: 1
S2020 Line Number: 14
Dolby Line Position Pair 3: N/P
Dolby Line Position Pair 4: N/P
Note:
The Lines of data on this display are arranged exactly as they will
appear on the Main Screen.
2.
Rotate the Line Select knob to scroll the highlight up or down among the
lines of text to select the line you want to modify.
3.
Rotate the Data Select knob to select the type of data you want to display on
this line. (If you select [Empty] a blank line will result on the Main Screen.
This can be used to separate the data lines so they are easier to read.)
4.
Rotate the Text Color knob to select the text color of your choice. Use
brighter colors for data that is more important to you, or dim colors for data
that is less important.
5.
Rotate the Font Size knob to select from a small, medium, or large font,
according to the importance of the data.
6.
Rotate the Status Page knob clockwise to select among the three available
pages.
7.
Repeat Steps 2 through 6 for Pages 2 and 3 as needed.
