Page 15
CHAPTER 2: Installation
Introduction
Overview
This chapter describes how to install the AMP2-16V Series monitor into a standard
19” rack and how to connect the necessary wiring.
Important Safety Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings. Use only a
dry cloth to clean the equipment.
2.
Do not block any ventilation openings. Install only in accordance with the
instructions in the section entitled,
3.
Do not install near any heat source such as a radiator, heat register, amplifier,
or stove.
4.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs
of equal width).
5.
Protect the power cord from being walked on or pinched, particularly at
plug’s source on the equipment and at the socket.
6.
Use only the attachments/accessories specified by the manufacturer.
7.
Unplug the equipment during lightning storms or when unused for long
periods of time.
8.
Use of a cart is neither recommended nor approved by Wohler.
9.
Refer all servicing to qualified service personnel. Servicing will be required
under all of the following conditions:
a)
The equipment has been damaged in any way, such as when the
power-supply cord or plug is damaged.
b)
Objects have fallen onto the equipment; or the equipment has been
WARNING:
Do not use this equipment near water, rain or moisture.
IMPORTANT:
By design, these monitors will only plug into a three-prong outlet
for your safety. If the plug does not fit into your outlet, contact an
electrician to replace the obsolete outlet.
