Page 87
Ethernet Setup Screen
This menu allows you to configure your AMP2-16V monitor for a local area network
(LAN).
Configuration Selection
Menu
Main Screen
Menu
Configure
Options
Option
Configuration Menu
Hardware
Configuration Menu
Configure
Hardware
Unit Information Menu
Unit Info
Ethernet Setup Screen
Ethernet Setup
Figure 5–15: Ethernet Setup Screen
Ethernet Setup Screen
Help
Unit Name
IP Address:
.
Save / Exit
Cancel
Select
Set for
DHCP
The IP Address cannot be
255.255.255.255
Unit Name:
Wohler’s AMP2-16V
255
.
255
.
255
255
IP Mask:
.
255
.
255
.
255
255
Gateway:
.
255
.
255
.
255
255
DNS:
.
255
.
255
.
255
255
Adjust
1.
Unit Name: Pressing this knob displays the Label Menu where you can
assign a unique and descriptive name to your monitor. This field will accept
up to 17 characters.
2.
Select: Pressing this knob highlights the current octet. Rotating this knob
moves the highlight from one octet to another.
3.
Set for DHCP: Pressing this knob resets all the fields (IP Address, IP
Mask, Gateway, and DNS) to all 0s and sets the monitor so it will accept a
DHCP-assigned IP address from your LAN.
Note:
The text area at the bottom of the screen will help you set a proper IP
