Page 19
Table 2–1: Available Add-On I/O Modules
I/O Module Name
I/O Module Description
3G/HD/SD-SDI-V Card
Two 3G/HD/SD-SDI inputs
8 de-embedded AES pairs outputs
1 selected reclocked or re-embedded
output (Includes automatic frame rate
detection)
AES Input Card
16 channel (eight unbalanced AES pairs)
AES Output Card
16 channel (eight unbalanced AES pairs)
Analog I/O Card
8 balanced channels in and 8 balanced channels
out
Analog I/O SPDIF TOSLINK Card
8 balanced channels in, 8 balanced channels
out,
and 1 optical SPDIF (TOSLINK) input
AVB Listener Card
Provides capability to listen to two AVB streams
carrying up to 8 audio channels in each
stream, for a total of 16 channels.
Dante/AES67 (AoIP) Card
16 Rx channels of Dante / 8 Rx channels of
AES67
Ravenna/AEC67 (AoIP) Card
16 Rx channels of Ravenna / 8 Rx channels of
AES67
Dolby Card D/E/DD+ Card
*
Provides Dolby bitstream decoding for an AES
pair or de-embedded SDI of your choice
*
The Dolby D/E/DD+ Card is an internal daughter card. It does not occupy one of
the vacant slots and does not require its own external connectors.
Refer to Table 6-7 for a complete list of Option Kits.
Basic Connections
Usually, the AMP2-16V is sold with a single 3G/HD/SD-SDI-V card in Slot 1. The
instructions below assume this configuration.
1.
Install the AMP2-16V into a standard 19” rack as close to eye-level as
possible.
2.
Connect power from the unit to A/C mains. If you have purchased a redundant
power supply, verify you are connecting the second power supply to A/C
mains power on a different circuit from the first.
3.
Connect an SDI video source to the SDI input connector.
