Page 143
Figure 8–2: Removed Module Message
Serial
Port
Initialize
Did you add or remove an optional module?
The system module list has changed. This is normal if you recently added
or removed a module. Press Initialize to set all presets to defaults and to
update the module list, or press Serial Port to enable serial port and
Ethernet access.
Slot: Expected
Detected
PS1: 8AES Input Board
8 AES Input Board
PS2: 3G SDI Input Board
3G SDI Input Board
PS3: 3G SDI I/O Board
3G SDI I/O Board
PS4: 8 AES Output Board
8 AES Output Board
PS5: 8 In/8 Out analog Board
8 In/8 Out Analog board
Dolby: Installed
Not Installed
If you have not recently removed an I/O module, remove the top cover to verify
that all the cards are seated properly, then restart the unit.
Restart
When powering up the AMP2-16V Series monitor, you may see the following
message.
Figure 8–3: Restart Message
Restart
System restart in process… Please wait.
