Page 29
How Do I Synchronize Internal Speaker Audio with an External
Video Source?
Audio from all input sources can be delayed before it gets to the internal speakers
by up to 170 ms. This is adjustable in 1 ms increments.
Audio Delay
is enabled and adjusted in the
Monitor Mixer Configuration
Menu
. Before proceeding to this menu, adjust the
Main Screen
controls so
that you are viewing the video and hearing the associated audio. Then
proceed to the
Monitor Mixer Configuration Menu
:
Configuration Selection
Menu
Main Screen
Menu
Configure
Monitor Mixer
Monitor Mixer
Configuration Menu
Figure 3–8: Monitor Mixer Configuration Menu
Monitor Mixer Configuration Menu
Save / Exit
Help
Cancel
Chan 1
Chan 2
Chan 3
Chan 4
Slot 2 SDI-3G In
Pair 4
Slot 2 SDI-3G In
Pair 5
+0
+0
+0
+0
Channel
Trim
Source
Pair
Select
Phase
LED
On/Off
Delay to Speakers = 170 mS
Audio
Delay
Dolby 5.1
Speaker
Mute:
Off
L Front
R Front
Center
LFE
Channel
Func
Mixer
Channel
Select
Set
Clusters
1.
Press the Audio Delay control to turn on the delay feature.
2.
Turn the Audio Delay control while listening to the audio and watching the
video. Adjust so that they appear to be synchronized.
3.
The Audio Delay control will then show you how much delay it needed to
add.
4.
If you need to set a specific delay, you can of course do that by simply
adjusting the Audio Delay control to that amount.
5.
Pressing the Audio Delay again will turn off the delay.
