background image

OPERATING INSTRUCTIONS

OAKTON

®

35612-series

Thermohygrometer

Kits

Printed in the U.S.A. 10/98-R3

00702-43

12. Warranty

OAKTON warrants this meter and probe to be free from significant deviations in
material and workmanship for a period of one year from date of purchase. If repair
or adjustment is necessary and has not been the result of abuse or misuse within 
the warrantied time period, please return—freight prepaid—and correction will 
be made without charge. OAKTON alone will determine if the product problem is
due to deviations or customer misuse.

Out-of-warranty products will be repaired on a charge basis.

13. Return of items

Authorization must be obtained from our Customer Service Department before
returning items for any reason. When applying for authorization, please include
data regarding the reason the items are to be returned. For your protection, items
must be carefully packed to prevent damage in shipment and insured against 
possible damage or loss. We will not be responsible for damage resulting from 
careless or insufficient packing. A restocking charge will be made on all 
unauthorized returns.

NOTE: We reserve the right to make improvements in design, construction, and

appearance of products without notice.

Thermohygrometer

Mn/Mx

ON

RST

OFF

HOLD

C / F

NEXT

PRG

F

%RH

Summary of Contents for 35612-series













Reviews: