WEG CFW501 V1.8X, Programming Manual, Page: 13 / 192

0
Quick Reference of Parameters, Alarms and Faults
CFW501 | 0-5
0
Param. Function Adjustable Range Factory Setting
User
Setting Propr.
Groups Pag.
P0210 Main Display Decimal Point 0 = wxyz
1 = wxy.z
2 = wx.yz
3 = w.xyz
4 = According to P0511
5 = According to P0511
6 = Reserved
7 = According to P0511 0 HMI 5-4
P0211 Secondary Display Scale Factor 0.1 to 1000.0 % 100.0 % HMI 5-4
P0212 Secondary Display Decimal Point See options in P0210 0 HMI 5-4
P0216 HMI Display Ilumination 0 = Inactive
1 = Active 1 HMI 5-6
P0220 LOC/REM Selection Src 0 = Always LOC
1 = Always REM
2 = HMI Key (LOC)
3 = HMI Key (REM)
4 = DIx
5 = Serial/USB (LOC)
6 = Serial/USB (REM)
7 = SoftPLC LOC 2 cfg I/O 7-5
P0221 LOC Reference Sel. 0 = Keypad
1 = AI1
2 = AI2
3 = AI3
4 = AI1 + AI2 > 0
5 = AI1 + AI2
6 = Serial/USB
7 = SoftPLC
8 = FI
9 = AI1 > 0
10 = AI2 > 0
11 = AI3 > 0
12 = FI > 0 0 cfg I/O 7-5
P0222 REM Reference Sel. See options in P0221 1 cfg I/O 7-5
P0223 LOC FWD/REV Selection 0 = Always FWD
1 = Always REV
2 = HMI Key (FWD)
3 = HMI Key (REV)
4 = DIx
5 = Serial/USB (FWD)
6 = Serial/USB (REV)
7 = SoftPLC 2 cfg I/O 7-6
P0224 LOC Run/Stop Sel. 0 = HMI Keys
1 = DIx
2 = Serial/USB
3 = SoftPLC 0 cfg I/O 7-6
P0225 LOC JOG Selection 0 = Disable
1 = HMI Key
2 = DIx
3 = Serial/USB
4 = SoftPLC 1 cfg I/O 7-7
P0226 REM FWD/REV Selection See options in P0223 0 cfg I/O 7-6
P0227 REM Run/Stop Sel. See options in P0224 1 cfg I/O 7-6
P0228 REM JOG Selection See options in P0225 2 cfg I/O 7-7
P0229 Stop Mode Selection 0 = Ramp to Stop
1 = Coast to Stop
2 = Quick Stop 0 cfg I/O 7-13
P0230 Dead Zone (AIs) 0 = Inactive
1 = Active 0 cfg I/O 12-2