WEG CFW501 V1.8X, Programming Manual, Page: 154 / 192

Parâmetros de Leitura
15-6 | CFW501
15
P0044 – kWh Output Energy
Adjustable
Range:
0 to 65535 kWh Factory
Setting:
Properties:
ro
Access groups
via HMI:
READ
Description:
It indicates the energy consumed by the motor.
It indicates up to 65535 kWh, and then it gets back to zero.
By setting P0204 = 4, the value of the parameter P0044 is reset to zero.
This value is kept even when power is removed from the inverter.
NOTE!
The value indicated in this parameter is calculated indirectly, and must not be used to measure the
energy consumption.
P0047 – CONF Status
Adjustable
Range:
0 to 999
Factory
Setting:
Properties: ro
Access groups
via HMI:
READ
Description:
This parameter shows the origin situation of the CONFIG mode. Refer to section 5.7 SITUATIONS FOR CONFIG
STATUS on page 5-12 .
The reading parameters in the range from P0048 to P0075 are detailed in section 14.15 FAULT HISTORY on
page 14-8 .
The reading parameters P0295 and P0296 are detailed in the section 6.1 INVERTER DATA on page 6-1 .
The reading parameters P0680 and P0690 are detailed in the section 7.3 CONTROL WORD AND INVERTER
STATUS on page 7-10 .