WEG CFW501 V1.8X, Programming Manual, Page: 52 / 192

Basic Instructions for Programming and Settings
5-10 | CFW501
5
34 = m³
35 = ft³
36 = gal/s
37 = gal/min (= GPM)
38 = gal/h
39 = l/s
40 = l/min
41 = l/h
42 = m/s
43 = m/min
44 = m/h
45 = ft/s
46 = ft/min
47 = ft/h
48 = m³/s
49 = m³/min
50 = m³/h
51 = ft³/s
52 = ft³/min
53 = ft³/h
Properties:
Access groups
via HMI:
HMI
Description:
This parameter selects the engineering unit that will be viewed in the user’s parameter of the SoftPLC which is
associated to it, that is, any user’s parameter of the SoftPLC that is associated to the indirect engineering unit
4 will be viewed in this format on the CFW501 HMI.
NOTE!
Parameters P1036, P1043 and P1047 are related to speed limits (Hz or rpm) in the HVAC functions
and are associated to the indirect engineering unit 4.
P0517 – Indirect Indication Form 4
Adjustable
Range:
0 = wxyz
1 = wxy.z
2 = wx.yz
3 = w.xyz
Factory
Setting:
1
Properties:
Access groups
via HMI:
HMI
Description:
This parameter selects the decimal point that will be viewed in the user’s parameter of the SoftPLC which is
associated to it, that is, any user’s parameter of the SoftPLC that is associated to the indirect indication form 4
will be viewed in this format on the CFW501 HMI.
NOTE!
Parameters P1036, P1043 and P1047 are related to speed limits (Hz or rpm) in the HVAC functions
and are associated to the indirect indication form 4.