Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 139 / 296

Configuring the USM Go for test tasks 5 Operation
USM Go Rev. 10 (06/2021) 5-63
Enlarged display of one reading:
Enlarged display of four readings:
Readings referring mainly to the gate A are put in green
frames, readings referring to the gate B in blue frames,
and readings referring to the gate C in red frames.
The same readings can be selected for the enlarged dis-
play as for the display in small boxes (see Section
Con-
figuring the measurement line , page 5-59).
Note
As an alternative to a reading, you can dis-
play the virtual alarm LED (see Section
LARGE (alarm signal) , page 5-64) or the
dataset name (see Section Displaying data-
set name , page 4-22).
– Switch to the second operating level.
– Select the function group EVAL .
– Select the function LARGE to display a single read-
ing in enlarged mode.
– Press the function keys to select the required value.
– Select the function MODE to display four readings in
enlarged mode.
– Press a function key to select the setting LARGE .
The readings selected in the functions READING 1 to
READING 4 are displayed in enlarged mode.
Note
For the selection of readings, see Section
Configuring the measurement line ,
page 5-59.
All boxes which cannot be displayed are
DISABLED .