Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 225 / 296

Storing a report header 6 Documentation
USM Go Rev. 10 (06/2021) 6-15
Including a header file in the test report
You can insert the text of a header file into one or sev-
eral test reports. To do this, you have to select a header
file and turn on the function
HDR IN REPORT .
– Switch to the second operating level.
– In the function group FILES , select the function
HEADER EDIT and briefly press the joystick
(USM Go) or the center key of the keypad
(USM Go+).
– Use the navigation to choose the name of the re-
quired file and briefly press the joystick (USM Go) or
the center key of the keypad (USM Go+).
– Finally, press the joystick (USM Go) or the center key
of the keypad (USM Go+) briefly again to close the
text edit box.
– Switch to the function HDR IN REPORT and press a
function key to turn on the function by choosing YES .
Next time a test report is stored, the contents of the se-
lected header file are inserted into the head of the test
report.