6 Documentation
Data Recorder (option)
6-26
Rev. 10 (06/2021)
USM Go
– Press the joystick (USM Go) or the center key of the
keypad (USM Go+) briefly to close the selection of
the filename.
– Switch to the first operating level. You will see the A-
scan.
– Press the joystick (USM Go) or the center key of the
keypad (USM Go+) briefly.
The A-scan is displayed in a slightly reduced mode with
the grid matrix of the selected Data Recorder file on its
right. You can now store readings in the grid matrix.
Storing readings in the grid matrix
When you see the grid matrix on the display screen, you
can store readings and the corresponding A-scans in
the individual cells.
Note
While the grid matrix is displayed, most A-
scan functions cannot be used (for example
the settings of the gates). You can only vary
the gain.
– Couple the probe to the first measuring point. The
reading is immediately indicated in the currently se-
lected cell of the grid matrix.
– Use the navigation to select another cell.
– Press the lower function key briefly to store the indi-
cated reading together with the A-scan. After storing,
the next cell is automatically selected.
– Press the lower function key briefly to only store the
indicated reading, without the A-scan.
Summary of Contents for Krautkramer USM Go
