Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 228 / 296

6 Documentation Videos
6-18 Rev. 10 (06/2021) USM Go
– Use the navigation to choose the first character of the
filename.
– Use the navigation to switch to the next position, and
choose the next character.
– Press the joystick (USM Go) or the center key of the
keypad (USM Go+) briefly to close the filename en-
try.
– Switch to the function MODE and press a function
key to select the RECORD mode.
– Switch to the function ENTER and briefly press the
joystick (USM Go) or the center key of the keypad
(USM Go+).
– If the note FILE EXISTS. DOUBLE KEY PRESS TO
OVERWRITE FILE. … is displayed, press the two
function keys at the same time to overwrite the exist-
ing file.
You will then automatically switch to the first operating
level with the A-scan.
Next to the A-scan, the control functions are displayed
in the function group
RECORD , whereas the settings for
each gate in question are displayed in the function
groups of gates.
Recording information is displayed on top of the A-scan:
● TIME = current time of recording,
● FRAM = number of single frames.