Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 205 / 296

Evaluation according to the DGS method 5 Operation
USM Go Rev. 10 (06/2021) 5-129
Turning the DGS evaluation off
You can turn the DGS evaluation off at any time.
– Switch to the first operating level.
– Select the function group DGS .
– Use the navigation to move upwards in order to dis-
play the specific function groups and functions for the
DGS.
– Select the function group SETUP .
– Select the function DGS MODE and press a function
key to turn the DGS evaluation off ( OFF ). The DGS
curve is no longer displayed in the A-scan.
Note
The DGS calibration is not lost by turning the
function off. By turning it on again, you can
use the function
DGS MODE to go back to
the DGS evaluation again without losing any
settings.
Deleting a DGS reference echo
You can delete the echo of the reference reflector. After
this, the DGS evaluation is not possible until you have
recorded a new reference echo.
– Switch to the first operating level.
– Select the function group DGS .
– Use the navigation to move upwards in order to dis-
play the specific function groups and functions for the
DGS.
– Select the function group REF CORR .
– Select the function DELETE REF and press a func-
tion key. A message prompting you to confirm is dis-
played.
– Press the two function keys at the same time to con-
firm the deletion of the reference echo. The deletion
is acknowledged by the indication
(NO REF) .