Waygate Technologies Krautkramer USM Go, Operating Manual

Page: 74 / 296

4 Principles of operation Saving the settings
4-22 Rev. 10 (06/2021) USM Go
– Switch over to the function ACTION and press the
function keys to select the function RECALL DATA-
SET .
– Switch over to the function FILENAME and briefly
press the joystick (USM Go) or the center key of the
keypad (USM Go+).
– Use the navigation to select the name of the required
dataset.
– Press the joystick (USM Go) or the center key of the
keypad (USM Go+) briefly. The selection is automat-
ically changed to the function
ENTER .
– Press the joystick (USM Go) or the center key of the
keypad (USM Go+) briefly.
The instrument settings of the selected dataset are re-
called and they are immediately active after closing the
recalling process.
Displaying dataset name
You can display the filename of the currently recalled in-
strument settings (dataset name) in the measurement
line on top of the A-scan.
Note
The dataset name can only be displayed in
the box on the far right.